| Eclipse
PA5532 |
Amplifier |
 |
•
125W × 4 Channel + 460W × 1 Channel Max. Power
Output at 2 Stereo
• 70W
× 4 Channel + 280W × 1 Channel 0.1% THD at 2 Stereo,
20– 20,000Hz@13.8V (RMS Continuous Power)
•
50W × 4 Channel + 200W × 1 Channel 0.1% THD at
4W Stereo, 20– 20,000Hz@13.8V (RMS Continuous Power)
•
ChannelFlex Crossover
•
Adjustable High-Pass Crossover (12dB/octave, 50–200Hz)
for Front & 120Hz (Fix) for Rear Independently
•
Adjustable Low-Pass Crossover (12dB/octave, 50–200Hz)
• Free-Flow Signal Circuit
• Double-Sided PCB
•
High-Current, High-Speed Output Devices |
| Eclipse
PA4212 |
Amplifier |
| |
•
310W × 2 Channel Max. Power Output at 2
•
200W × 2 Channel 0.1% THD at 2 Stereo, 20–20,000Hz@13.8V
(RMS Continuous Power)
• 130W
× 2 Channel 0.1% THD at 4 Stereo, 20–20,000Hz@13.8V
(RMS Continuous Power)
• ChannelFlex
Crossover
• Adjustable
Low-Pass Crossover (12dB/octave, 50–200Hz)
•
Subsonic Filter (20Hz Fix)
•
Free-Flow Signal Circuit
•
Double-Sided PCB
• High-Current,
High-Speed Output Devices
|
| Eclipse
EA3422 |
Amplifier |
 |
•
123W × 4 Channel Max. Power Output at 2 Stereo
• 70W × 4 Channel 0.1%
THD at 2 Stereo @13.8V (RMS Continuous Power)
•
50W × 4 Channel 0.1% THD at 4 Stereo @13.8V (RMS Continuous
Power)
• ChannelFlex
Crossover
• Adjustable
High-Pass Frequency (50–200Hz, L/R Independent)
•
Low-Pass Frequency (90Hz)
•
Adjustable Bass-Boost Level (45Hz, 0–9dB, F/R Separate)
• High-Current, High-Speed
Output Devices |
| Eclipse
EA2212 |
Amplifier |
 |
•
105W × 2 Channel Max. Power Output at 2
•
70W × 2 Channel 0.1% THD at 2 Stereo @13.8V (RMS Continuous
Power)
• 50W ×
2 Channel 0.1% THD at 4 Stereo @13.8V (RMS Continuous Power)
• ChannelFlex Crossover
• High-Pass Frequency (120Hz)
• Adjustable Low-Pass Frequency
(50–200Hz)
• Bass
Boost ON/OFF (45Hz, 9dB)
• High-Current,
High-Speed Output Devices |
| JL
Audio 300/4 |
Amplifier |
|
•
Rated Power (stereo):
75 W RMS x 4 @ 1.5 ohm-4 ohm (11V-14.5V)
• Rated Power (bridged):
150 W RMS x 2 @ 3 ohm-8 ohm (11V-14.5V)
• Differential-Balanced Input Topology: (2 pairs of
inputs)
• Front Crossover:
fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24
dB per octave)
• Rear
Crossover: fully-variable (50 Hz-5 KHz), selectable-slope LP or
HP (12 or 24 dB per octave)
•
Speaker output connections:
accept up to 8ga. wire
• +12V
and Ground connections: accept up to 4ga. Wire
|
| JL
Audio 300/2 |
Amplifier |
|
• Rated
Power (stereo):
150 W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
• Rated Power (bridged):
300 W RMS x 1 @ 3 ohm-8 ohm (11V-14.5V)
• Differential-Balanced Input Topology: (1 pair of inputs)
• On-board Crossover: fully-variable (50 Hz-5 KHz),
selectable-slope LP or HP (12 or 24 dB per octave)
• Preamp Output: 2-channel (full-range, LP or HP)
• Speaker output connections: accept up to 8ga. wire
• +12V and Ground connections: accept up to 4ga. Wire
|
| JL
Audio e2150 |
Amplifier |
|
• Rated
Power (stereo):
45W RMS x 2 @ 4 ohm (12.5V);
75W RMS x 2 @ 2 ohm (12.5V)
• Rated Power (bridged):
90W RMS x 1 @ 8 ohm (12.5V);
150W RMS x 1 @ 4 ohm (12.5V)
• Absolute Symmetry™ Class AB Circuit (U.S. Patent #6,294,959)
• Differential, Noise-Cancelling Input Topology:
RCA jack inputs (low-level) and multi-pin jack (high-level)
• On-board Crossover:
State-variable, 12dB/octave Butterworth with continuously variable
cutoff frequency selection from 50 – 200 Hz. Configurable
as Low-Pass or High-Pass
• Preamp Output: Pass-through type.
• Speaker output connections:
accept up to 8 AWG wire
• +12V and Ground connections:
accept up to 4 AWG wire
|
| |
|
 |
|
|
|
